IGNIS FILTER PRESS

TECHNOLOGY AND EVOLUTION

Ignis filter press red logo - Matec Industries

The Ignis Filter Press is perfect for medium-sized production plants specialising in stone, concrete or chemical processing.

Its name is derived from the Latin word meaning ‘fire’. The main element in the construction of our machines, forged by the fire of our technical experts.

The Ignis Filter Press is available in the following models:
800×800 / 1000×1000.

FIELDS OF APPLICATION FOR THE IGNIS FILTER PRESS

OPTIONAL ON THE IGNIS FILTER PRESS

DETAILS MAKE THE DIFFERENCE

Matec has always taken care of its machines down to the smallest detail, supplying them with a whole series of optionals born from the research and ingenuity of our R&D technicians.
The continuous search for perfection and the constant comparison with our customers has allowed us to optimise ideal solutions for all the most varied requirements, to provide our partners, always, with the best possible product.

OPTIONALS OF THE CUSTOMER'S CHOICE

Optional Cake Dryer filter press logo - Matec Industries

Cake Dryer

The Cake Dryer is a 100% automatic system for the drying of the cakes of mud through the use of compressed air. The system is similar to the Core Blow; the jet of compressed air is blown into the central hole of supply of the plates, thus allowing a drying of block 20 plates, to have a final cake completely dry.

Watch the video

Optional Cake Washing filter press logo - Matec Industries

Cake Washing

Cake Washing is a closed-loop system for special slurries containing chemicals. It is usually used in conjunction with membrane plates, allowing clean water to flow into the plate chambers before the bricks are discharged. This process rinses the bricks, lowering the level of chemicals below the threshold that would make them ‘special sludge’ with the associated disposal costs.

Watch the video

Optional Drip Tray filter press logo - Matec Industries

Drip Tray

The Drip Tray system consists of one or two staggered trays that occupy the part underneath the filter press during the filtration phase and collect the water droplets that escape. Once the filtration phase is over, the trays are then moved by a motor to allow the removal of the cake. This system is designed to prevent some of the water droplets escaping from the cloths from falling on the already discharged mud bricks.

Watch the video

Optional Real Washing filter press logo - Matec Industries

Real Washing

The filter press can be equipped with an automatic plate and cloth washing system. The Real Washing system consists of a valve and piping system on the feed side of the filter press and vent valves on each plate. The feed pump sends clean water to wash out the residual sludge. The system washes the plates 20 at a time. The frequency of the washing cycle is set on the control panel.

Watch the video

Optional Robo Wash filter press logo - Matec Industries

Robo Wash

The Robo Wash is a fully automated canvas washing system that can be put into operation at the push of a button. The high-pressure sprayer, located at the end of a sliding curtain, runs between each plate and dispenses high-pressure washing water over the entire surface of the canvas, dislodging and removing any build-up of dirt on the canvas.

Watch the video

Optional Squeezing Membrane filter press logo - Matec Industries

Squeezing Membrane

The Squeezing Membrane system allows better mechanical pressing of the sludge cake. Basically, the membrane is inflated with water and grows in volume by squeezing the sludge that is pumped into the chamber. A variable volume is the main difference to standard plates. The special plate, together with the drainage system, guarantees a drier end product and a more efficient filtration cycle. The draining of the cake also benefits. The material of the membrane can be varied by using different technopolymers depending on the customer’s needs and the material to be processed; they are usually made of polypropylene.

Watch the video

Optional Torbidy sensor filter press logo - Matec Industries

Torbidity Sensor

The Torbidity Sensor is placed in the clear water storage tank and consists of a candle gauge (sensor) immersed in water with dissolved particles. Based on the feedback from the sensor, it is possible to determine where to direct the water flow. Using predefined values, if an excessively high turbidity level is detected, the system activates the valves and diverts the water flow from the fresh water tank to the wastewater collection tank, in order to put the water through the clarification phase again.

Watch the video

REQUEST A QUOTE

FILL IN THE FORM TO DOWNLOAD THE DATA SHEET